BUIMA Energy Co., Ltd.
BUIMA Energy Storage Tile (B.E.S.T.)
Modular wall-mounted storage that boosts single-phase power to 400 VDC

- Energy Storage Tile
- Control Box
BUIMA Energy Storage Tile (B.E.S.T.) is a modular storage system from BUIMA Energy. Each 4 kWh, 102.4 V tile connects through the Control Box in series and parallel; up to four tiles deliver 16 kWh at 400 VDC. It runs on single-phase 200–240 VAC and can feed a DC-DC fast charger for EVs, provide backup power or pair with solar. At about 68 mm thick it mounts on a wall, with optional custom surface printing. Transcend Intelligence works with qualified partners to size the system for your loads, usage and site.
Who it's for
- Residential buildings: per-floor backup and peak shaving
- Parking lots and gas stations: paired with DC fast chargers
- Commercial and industrial sites: backup power and renewables
- Remote sites with limited grid capacity
Key features
- Single-phase in, 400 VDC outThe Control Box accepts single-phase 90–264 VAC, stores energy and boosts to 400 VDC for a DC-DC charger, without a three-phase supply.
- Modular series/parallelEach tile adds 100 VDC / 4 kW, up to four tiles: 200 VDC / 8 kW, 300 VDC / 12 kW, 400 VDC / 16 kW.
- LFP chemistryJapanese LFP (lithium iron phosphate) cells; the manufacturer specifies 8,000+ cycles.
- Slim, wall-mounted, printableTiles measure 897 × 897 × 68.9 mm and mount on walls; surfaces can be custom-printed to match architecture or carry branding.
- Built-in EMS/BMS and AIoTThe Control Box includes EMS and BMS and can connect to building management systems for dynamic power dispatch.
- Renewable-readyOptional DC input from solar or other renewables.
Compare specs
| Model | Energy Storage Tile | Control Box |
|---|---|---|
| Capacity / power | 4 kWh | Up to 28 kW (max. 4 tiles) |
| Voltage | Nominal 102.4 V; charge 115.2 V | Input 90–264 VAC single-phase, 50/60 Hz; output up to 464 VDC |
| Current | Charge 20 A nominal; max continuous 40 A charge / 100 A discharge | AC max 60 A; rated output max 60 A |
| Efficiency | — | > 90% |
| Dimensions | 897 × 897 × 68.9 mm | 900 × 900 × 67 mm |
| Weight | 70 kg | 40 kg |
| Temperature | Charge 0–55 °C; discharge -20–55 °C | Operating -20 to +60 °C; ~90% RH non-condensing |
| Protection / environment | Over-current, short-circuit, cell over/under-voltage and over-temperature protection | Indoor / semi-outdoor (IP55) |
| Communication | — | CAN bus / RS485 / Bluetooth |
| Compliance | — | IEC62619 / RoHS 2011/65/EU |
| Mounting | Wall mount | |
Swipe to compare 2 models
Per BUIMA Energy brochure p5. 8,000+ cycles is the manufacturer's rating. Usable capacity declines at low temperatures.
In use

- Brand case
Brand sites: an office in Miyazaki, Japan (2024/09), a test site for a listed Japanese company in Tochigi (2024/11), and a smart residential project in Tainan.
Related solutions and products
- SolutionSmart Energy
- SolutionSmart EMS
- B.E.S.T. Solar + Storage + EV ChargingDC fast charging from single-phase power plus storage, with optional solar

- Grid-Scale Energy Storage (with BUIMA)Grid-connected storage projects from planning and construction to EMS and operations

- MiEcoMatrix Carbon Management & Smart Building PlatformOne dashboard for power, water and HVAC data that helps compile carbon and ESG information

Notes
Specifications and features are summarized from manufacturer materials. Scope of supply, compatibility and deployment are confirmed for each project; nothing on this page is a performance guarantee. Storage and charging installations must meet local utility, building and fire codes and be installed by qualified contractors. Site results and payback figures are manufacturer data and do not predict results at your site.
BUIMA Energy Co., Ltd.
BUIMA Energy Storage Tile (B.E.S.T.)
Modular wall-mounted storage that boosts single-phase power to 400 VDC
- Single-phase in, 400 VDC out
- Modular series/parallel
- LFP chemistry
- Slim, wall-mounted, printable
- Built-in EMS/BMS and AIoT

Who it's for
- Residential buildings: per-floor backup and peak shaving
- Parking lots and gas stations: paired with DC fast chargers
- Commercial and industrial sites: backup power and renewables
- Remote sites with limited grid capacity
Solution
Smart Energy
BUIMA Energy Storage Tile (B.E.S.T.) is a modular storage system from BUIMA Energy. Each 4 kWh, 102.4 V tile connects through the Control Box in series and parallel; up to four tiles deliver 16 kWh at 400 VDC. It runs on single-phase 200–240 VAC and can feed a DC-DC fast charger for EVs, provide backup power or pair with solar. At about 68 mm thick it mounts on a wall, with optional custom surface printing. Transcend Intelligence works with qualified partners to size the system for your loads, usage and site.
| Spec | Energy Storage Tile | Control Box |
|---|---|---|
| Capacity / power | 4 kWh | Up to 28 kW (max. 4 tiles) |
| Voltage | Nominal 102.4 V; charge 115.2 V | Input 90–264 VAC single-phase, 50/60 Hz; output up to 464 VDC |
| Current | Charge 20 A nominal; max continuous 40 A charge / 100 A discharge | AC max 60 A; rated output max 60 A |
| Efficiency | — | > 90% |
| Dimensions | 897 × 897 × 68.9 mm | 900 × 900 × 67 mm |
| Weight | 70 kg | 40 kg |
| Temperature | Charge 0–55 °C; discharge -20–55 °C | Operating -20 to +60 °C; ~90% RH non-condensing |
| Protection / environment | Over-current, short-circuit, cell over/under-voltage and over-temperature protection | Indoor / semi-outdoor (IP55) |
Transcend Intelligence
+886-2-6605-7099・service@transcend.tw
LINE @874CCXUS
25F., No. 1092, Zhongzheng Rd., Taoyuan Dist., Taoyuan City, Taiwan
Specifications and features are summarized from manufacturer materials. Scope of supply, compatibility and deployment are confirmed for each project; nothing on this page is a performance guarantee. Storage and charging installations must meet local utility, building and fire codes and be installed by qualified contractors. Site results and payback figures are manufacturer data and do not predict results at your site.
Scan for details
transcend.tw/p/buima?lang=en
